What Do You Need To Know About The Multi-Cyclone?

In today’s world, society is facing various problems but amongst them, pollution is one of the most vicious ones that cause several other problems as well. Among all other sources, the industrial sector contributes mostly to polluting the environment. Dust, chemicals, and other industrial pollutants are the main cause of air pollution. Thus, to curb the number of pollutants in the air, it is now mandatory to use industrial dust collection systems.

There are different types of dust collection systems, which are generally used in cement plants, asphalt plants, grinding and milling operations. However, to get the best boiler emission control in your factory, you must go for the multi-cyclones. Using this before the like Baghouse or Cartridge Collector makes things easier.

What Is A Cyclone?

The cyclone is a system of collecting the industrial dust from machines, which can be the cause of pollution in the air. It is generally used before the Baghouse or collector so that most of the dust and different kinds of another residue can be collected easily. The cyclone is available in different types and can be used at a temperature of up to 400-degree centigrade.

Benefits Of Using Multi-Cyclone Dust Collection

This is probably the best dust collection system available in the Australian market, which can give you various benefits over other dust collection systems like a cartridge. The benefits worth mentioning here are as follows:

1. Increase in removing efficiency: Whether you need to collect 50 CFM or 100000 CFM of dust, the use of the multi cyclones is the best bet for you. Moreover, when you use it before baghouse, then larger chunks of dust will be removed even before it reaches the Baghouse. Therefore, with this, your filter’s pressure will be less, and the removal efficiency will increase certainly. Mostly this kind of dust collection system can remove almost 99% of the pollutants and dust, which are more than 20 microns or more in size.

2. The long life of filter: The cartridge collector or Baghouse uses the compressed air to knock off dust. Thus, with the collection of more dust, the collector needs to be changed frequently. Eventually, that can curb the lifespan of your filter. But, if you use the cyclones before the Baghouse, then it already removes the maximum amount of dust even before it reaches to the bag or in the collector. In this way, it can help to maximize the life of the filter.

3. Product recovery: If you need to collect the dust for reuse or it’s full of other valuable materials like gold, silver or any other then using only the Baghouse or the collector may not be recovered easily as it is get lost easily in the filter. However, when you use multi-cyclones, the cyclone collects the dust before it reaches the collector and you can easily recover them from there.

4. Low maintenance: Baghouses or the cartridge collectors are highly priced and demands extremely high quality of maintenance. This can increase the total operating cost. Whereas, when you use the single or multi-cyclone in your dust collection system then you do not need to spend so much and frequently in maintaining your Baghouse as the maximum amount of dust will be collected in the cyclone only. Moreover, maintaining the cyclone is very easy and low-cost.

5. Difficult applications can be done easily: If you are dealing with sticky, fibrous, or hygroscopic dust, it is difficult for your Baghouse to collect the waste properly whereas using a cyclone you can easily collect them.